Malvern Armatures - Stop Animation Motion Armature Manufacturers and Suppliers Malvern Armatures - Stop Motion Animation Armature Manufacturers and Suppliers Malvern Armatures Facebbok Malvern Armatures Twitter

Animal Range - INDY Small & Large Quadruped

Elephant Werewolf Tiger Jack Rabbit Wolf Quadruped Family Gorilla Family

The INDY Quadruped armature has solid, nickel plated, steel limbs, aluminium shoulder block and anodised aluminium hip block. The hip block has a single M3 rigging point and each foot has an M3 tie down point plus the ability to use magnetic hold down. The link plates are brass or stainless steel secured with M3 stainless steel screws. All component parts of the hip and shoulder assemblies are secured using Loctite 270 high strength thread lock.

These versatile armatures can be used for all sorts of four legged animals or if you have something specific in mind please contact us and we will endeavour to redesign the armature to suit your character.

Malvern Armatures - Stop Motion Animation Aramtures - INDY Quadruped Armature
PL144 - INDY Large
Quadruped Armature
with Brass Link Plates
£112.00
 
PL145 - INDY Small
Quadruped Armature
with Brass Link Plates
£104.00
PL151 - INDY Large
Quadruped Armature
with Stainless Steel Link Plates
£128.00
 
PL152 - INDY Small
Quadruped Armature
with Stainless Steel Link Plates
£119.00

INDY - Small Quadruped

Standing 60mm tall to the shoulders as posed this quadruped has solid, nickel plated, steel limbs, a single jointed back with a standard shoulder design allowing for more realistic movement. The anodised hip block is supplied with a single M3 rigging point and each foot has an M3 tie down point plus the provision of magnetic hold down on the studio table. The armature is supplied with a 75mm long M3 rigging stud, four standard 50mm tie down assemblies, four M3x12mm tie down screws and a 2mm allen key for adjusting the tension of the link plate joints. Each Armature is supplied with a length of 1mm Aluminium Wire that can be twisted to form the tail.

Malvern Armatures - Stop Motion Animation Aramtures - INDY Small Quadruped Armature

INDY Small Quadruped Range
(Shown without a tail)

Malvern Armatures - Stop Motion Animation Aramtures - INDY Small Quadruped Armature Malvern Armatures - Stop Motion Animation Aramtures - INDY Small Quadruped Armature
Malvern Armatures - Stop Motion Animation Aramtures - INDY Small Quadruped Armature Malvern Armatures - Stop Motion Animation Aramtures - INDY Small Quadruped Armature

INDY Small Quadruped Armature - Key Features
Fully Assembled
Standard Shoulder Design
Standard Link Plate Assemblies
Single Jointed Backbone Standard Link Plate Assemblies
Hip Block - M3 Rigging Point
Assembled using Loctite 270 High Strength Thread Lock
Magnetic Tie Down
M3 Tie Down Point on each Foot
1 x 75mm Rigging Stud with Nuts & Washers
4 x 50mm Standard Tie Down Assemblies
4 x M3x12mm Stainless Steel Tie Down Screws
1 x 2mm Al
len Key

Build Specification
Anodised Aluminium Hip Block
Nickel Plated Steel Limbs & Stud Ends with integrated 6mm Balls
6mm Diameter Nickel Plated Steel Socket Joint Balls
8mm wide Nickel Plated Steel Feet
Brass or Stainless Steel Link Plate Assemblies
M3 Stainless Steel Link Plate Screws


INDY - Large Quadruped

Standing 60mm tall (to be confirmed) to the shoulders as posed this quadruped has solid, nickel plated, steel limbs, a double jointed back with a standard shoulder design allowing for more realistic movement. The anodised hip block is supplied with a single M3 rigging point and each foot has an M3 tie down point plus the provision of magnetic hold down on the studio table if required. The armature is supplied with a 75mm long M3 rigging stud, four standard 50mm tie down assemblies, four M3x12mm tie down screws and a 2mm allen key for adjusting the tension of the link plate joints. Each Armature is supplied with a length of 1mm Aluminium Wire that can be twisted to form the tail.

Malvern Armatures - Stop Motion Animation Aramtures - INDY Large Quadruped Armature

INDY Large Quadruped Range
(Shown without a tail)

Malvern Armatures - Stop Motion Animation Aramtures - INDY Large Quadruped Armature Malvern Armatures - Stop Motion Animation Aramtures - INDY Large Quadruped Armature
Malvern Armatures - Stop Motion Animation Aramtures - INDY Large Quadruped Armature Malvern Armatures - Stop Motion Animation Aramtures - INDY Large Quadruped Armature

INDY Large Quadruped Armature - Key Features
Fully Assembled
Standard Shoulder Design
Standard Link Plate Assemblies
Double Jointed Backbone Standard Link Plate Assemblies
Hip Block - M3 Rigging Point
Assembled using Loctite 270 High Strength Thread Lock
Magnetic Tie Down
M3 Tie Down Point on each Foot
1 x 75mm Rigging Stud with Nuts & Washers
4 x 50mm Standard Tie Down Assemblies
4 x M3x12mm Stainless Steel Tie Down Screws
1 x 2mm Al
len Key

Build Specification
Anodised Aluminium Hip Block
Nickel Plated Steel Limbs & Stud Ends with integrated 6mm Balls
6mm Diameter Nickel Plated Steel Socket Joint Balls
8mm wide Nickel Plated Steel Feet
Brass or Stainless Steel Link Plate Assemblies
M3 Stainless Steel Link Plate Screws


What are the differences between our Armature Ranges?

The INDY Hinge Range: The INDY Hinge Range of Armatures have a combination of Standard & Hinged Link Plate Assemblies. The joints on the Lower Knees, Hips and Arms are HINGED to provide a more realistic skeletal movement. The armature is assembled using machined nickel plated solid steel limbs and stud ends with 6mm ball joints combined with anodised aluminium shoulder and hip blocks eliminating the need for thread locked link/ball assemblies.
The INDY 6 Range: The INDY 6 Range of Armatures uses Standard Link Plate Assemblies and is assembled using machined nickel plated solid steel limbs and stud ends with 6mm ball joints combined with anodised aluminium shoulder and hip blocks eliminating the need for thread locked link/ball assemblies.
The INDY 9 Range: The INDY 9 Range of Armatures have a combination of Standard & Hinged Link Plate Assemblies. The joints on the Lower Knees, Hips and Arms are HINGED to provide a more realistic skeletal movement. The backbone comprises a 9mm brass & steel joint and 4mm diameter upper and lower back components for extra strength. The rest of the armature is assembled using 3mm machined nickel plated solid steel limbs and stud ends with 6mm ball joints combined with brass shoulder and hip blocks eliminating the need for thread locked link/ball assemblies.
The BESPOKE Range: The Bespoke Range of Armatures uses a combination of INDY or Professional components depending on the armature being built.