Malvern Armatures - Stop Motion Animation Armature Manufacturers and Suppliers Malvern Armatures - Stop Motion Animation Armature Manufacturers and Suppliers Malvern Armatures Facebbok Malvern Armatures Twitter

Professional Range - H1 Model Human Armature

Professional H2 Model Professional H3 Model Professional H4 Model Professional H5 Model

Standing 230mm tall to the shoulders this adult Human Armature has M3 Stainless Steel Studding Limbs, a complex shoulder design allowing for more human movements, a double jointed back with standard hips. The shoulder and hip blocks are anodised aluminium and the hip block has 2 x M3 rigging points set at right angles. The nickel plated steel feet are machined with an M3 tie down point plus the ability to use magnetic hold down. The link plate assemblies are either anodised aluminium or stainless steel with nickel plated 6mm steel ball joints. All component parts are assembled using Loctite 270 high strength thread lock. The Armature is supplied with a 75mm Rigging Stud, 2x50mm Standard Tie Down Assemblies, 2 x 12mm Tie Down Screws and an Allen Key to tension the Link Plate Assemblies.

PL120 - PRO H1 Standard Armature
with Aluminium Link Plates
£103.00
 
PL125 - PRO H1 Standard Armature
with Stainless Steel Link Plates
£118.00
Malvern Armatures - Stop Motion Animation Armature - H1 Professional Range Armature Malvern Armatures - Stop Motion Animation Armature - H1 Professional Range Armature Malvern Armatures - Stop Motion Animation Armature - H1 Professional Range Armature
Malvern Armatures - Stop Motion Animation Armature - H1 Professional Range Armature
(For a full size PDF dimension drawing select image)

PROFESSIONAL H1 Standard Armature - Key Features
Fully Assembled
Complex Shoulder Design
Standard Link Plate Assemblies

Double Jointed Backbone
Hip Block - M3 Rigging Point
Assembled using Loctite 270 High Strength Thread Lock
Magnetic Tie Down
M3 Tie Down Point on each Foot
1 x 75mm Rigging Stud with Nuts & Washers
2 x 50mm Standard Tie Down Assemblies
2 x M3x12mm Stainless Steel Tie Down Screws
1 x 2mm Al
len Key

Build Specification
Aluminium Shoulder and Hip Blocks
M3 Stainless Steel Studding Limbs & 6mm Balls
8mm wide Nickel Plated Steel Feet
15 x Standard Link Plate Assemblies
(Anodised Aluminium or Stainless Steel)
M3 Stainless Steel Link Plate Screws

Malvern Armatures - Professional H1 Range of Stop Motion Animation Armatures - Complex Shoulder Assembly

Head and Complex Shoulder Assembly

The head and shoulder assembly on the Professional H1 and Professional H2 models comprises 5 link plate assemblies and the machined aluminium shoulder block. The limbs are M3 threaded studding.

The link plates are precision machined anodised aluminium or stainless steel and are secured using M3x8mm stainless steel socket head screws.

Components are secured using Loctite 270 high strength thread lock and M3 locknuts.

Malvern Armatures - Professional H1 Range of Stop Motion Animation Armatures - Complex Back Assembly

Complex Back Assembly

The complex back assembly on the Professional H1 model comprises 2 link plate assemblies.

The link plates are precision machined anodised aluminium or stainless steel and are secured using M3x8mm stainless steel socket head screws.

Components are secured using Loctite 270 high strength thread lock and M3 locknuts.

Malvern Armatures - Professional H1 Range of Stop Motion Animation Armatures - Hip Assemby

Hip Assembly

The hip assembly comprises 2 link plate assemblies and the machined aluminium hip block.

The link plates are precision machined anodised aluminium or stainless steel and are secured using M3x8mm stainless steel socket head screws.

The hip block has two M3 threaded holes, set at right angles, that can be used with our Rigging Solutions.

Components are secured using Loctite 270 high strength thread lock and M3 locknuts.

Malvern Armatures - Professional H1 Range of Stop Motion Animation Armatures - Standard Link Plate Assembly

Elbow & Knee Link Plate Assembly Assembly

The elbow and knee comprises one Link Plate Assembly.

The elbow assembly has a M3 studding forearm and the design requires the manufacture of a hand assembly which is fixed to the forearm using K&S square bar and strong adhesive.

For more information about Basic Wire Hand Assemblies click here and scroll to the bottom of the page.

The link plates are precision machined anodised aluminium or stainless steel and are secured using M3x8mm stainless steel socket head screws.

Components are secured using Loctite 270 high strength thread lock and M3 locknuts.

Malvern Armatures - Professional H1 Range of Stop Motion Animation Armatures - Foot Assembly

Foot Assembly

The foot assembly comprises one link plate assembly and a machined steel foot. Each foot has an M3 tapped hole that can be used to secured the armature in the studio using the M3x12mm Tie Down Screws or the Standard Tie Down Assembly, both supplied with your armature, or you can use strong magnets.

The link plates are precision machined anodised aluminium or stainless steel and are secured using M3x8mm stainless steel socket head screws.

Components are secured using Loctite 270 high strength thread lock and M3 locknuts.

What are the differences between our Armature Ranges?

The INDY Hinge Range: The INDY Hinge Range of Armatures have a combination of Standard & Hinged Link Plate Assemblies. The joints on the Lower Knees, Hips and Arms are HINGED to provide a more realistic skeletal movement. The armature is assembled using machined nickel plated solid steel limbs and stud ends with 6mm ball joints combined with anodised aluminium shoulder and hip blocks eliminating the need for thread locked link/ball assemblies.
The INDY 6 Range: The INDY 6 Range of Armatures uses Standard Link Plate Assemblies and is assembled using machined nickel plated solid steel limbs and stud ends with 6mm ball joints combined with anodised aluminium shoulder and hip blocks eliminating the need for thread locked link/ball assemblies.
The INDY 9 Range: The INDY 9 Range of Armatures have a combination of Standard & Hinged Link Plate Assemblies. The joints on the Lower Knees, Hips and Arms are HINGED to provide a more realistic skeletal movement. The backbone comprises a 9mm brass & steel joint and 4mm diameter upper and lower back components for extra strength. The rest of the armature is assembled using 3mm machined nickel plated solid steel limbs and stud ends with 6mm ball joints combined with brass shoulder and hip blocks eliminating the need for thread locked link/ball assemblies.
The PROFESSIONAL Range: The Professional Range of Armatures use Standard Link Plate Assemblies and is assembled using precision machined 6mm nickel plated steel balls in the link assembly with M3 stainless steel limbs that are secured during assembly using Loctite 270 high strength thread lock.
The BESPOKE Range: The Bespoke Range of Armatures uses a combination of INDY or Professional components depending on the armature being built.